NIOSH logo and tagline

Understanding Filtration Efficiency Testing and Fit Testing in Filtering Facepiece Respirators (FFRs)

September 2021
DHHS (NIOSH) Publication Number 2021-123
Cover page of Publication No. 2021-123, Understanding Filtration Efficiency Testing and  Fit Testing in Filtering Facepiece Respirators (FFRs)

This fact sheet describes filtration efficiency testing and the proper fit testing procedures for a filtering facepiece respirator (FFR), explaining why both are necessary for a respirator to perform as expected. A respirator user’s understanding of these procedures and how employers perform fit tests to minimize contaminant leakage into the respirator will enhance the user’s knowledge of how an FFR helps to protect respiratory health.

Understanding Filtration Efficiency Testing and Fit Testing in Filtering Facepiece Respirators (FFRs) (2021-123) [PDF – 521 KB]

Suggested Citation

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123 (revised 11/2021), https://doi.org/10.26616/NIOSHPUB2021123revised112021

List of Revisions

Revision Date

Revision Date

Revision Date

Revisions

Revisions

Revisions

Citation of Revision

Citation of Revision

Citation of Revision

September, 2021 (original)

Revision Date

September, 2021 (original)

Revisions

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123,  https://doi.org/10.26616/NIOSHPUB2021123

Citation of Revision

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123,  https://doi.org/10.26616/NIOSHPUB2021123

September, 2021

Revision Date

September, 2021

On page 1, there are references to three levels of filtration efficiencies for the nine filter classes of filtering facepiece respirators. The original references to filtration efficiencies incorrectly reported one percentage to be 99.7%. This percentage has been corrected to 99.97%.

Revisions

On page 1, there are references to three levels of filtration efficiencies for the nine filter classes of filtering facepiece respirators. The original references to filtration efficiencies incorrectly reported one percentage to be 99.7%. This percentage has been corrected to 99.97%.

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123 (revised 9/2021), https://doi.org/10.26616/NIOSHPUB2021123revised092021

Citation of Revision

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123 (revised 9/2021), https://doi.org/10.26616/NIOSHPUB2021123revised092021

November, 2021

Revision Date

November, 2021

On page 3, the photo of a test subject participating in a quantitative fit test was cropped so that only the top portion of the tube assembly is visible. A footnote was also added after the paragraph describing the quantitative fit test to clarify that, during the test, strain relief must be provided so the weight of the tube assembly does not artificially lower the fit factor by negatively affecting the seal of the respirator to the face.

Revisions

On page 3, the photo of a test subject participating in a quantitative fit test was cropped so that only the top portion of the tube assembly is visible. A footnote was also added after the paragraph describing the quantitative fit test to clarify that, during the test, strain relief must be provided so the weight of the tube assembly does not artificially lower the fit factor by negatively affecting the seal of the respirator to the face.

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123 (revised 11/2021), https://doi.org/10.26616/NIOSHPUB2021123revised112021

Citation of Revision

NIOSH [2021]. Understanding filtration efficiency testing and fit testing in filtering facepiece respirators (FFRs). By Schall J, Coffey C. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2021-123 (revised 11/2021), https://doi.org/10.26616/NIOSHPUB2021123revised112021